PV system inverter trouble
Hello, we're making a rooftop PV system to analyze the potential and self-consumption. We used the inverter wizard but are having a tough time making it work (i.e. MPP voltage etc. are too high/too low) and are unsure of the impacts on our simulation targets. Is there a way to remove the inverter dynamics and just assume some typical loss ratio?
Dear Polysun User,
you cannot ignore the inverter layout.
Please check your settings in the menu "Options" --> "Settings" --> "Photovoltaics (2)" --> "Inverter data sources". Are these sources enabled? If you don't find any suitable inverter from a preferred company in the Wizard, you can select an anonymous inverter. Best regards
Andreas
you cannot ignore the inverter layout.
Please check your settings in the menu "Options" --> "Settings" --> "Photovoltaics (2)" --> "Inverter data sources". Are these sources enabled? If you don't find any suitable inverter from a preferred company in the Wizard, you can select an anonymous inverter. Best regards
Andreas
-
- Information
-
Wer ist online?
Mitglieder in diesem Forum: 0 Mitglieder und 2 Gäste