Hallo forum members,
Is there any way of generating the 'correct' heat load profile of a non-residential building when only the annual heat consumption is known (not the hourly heat demand) and a quasi-dynamic or degree-hours model is chosen?
It seems that Polysun by default assumes that it is a residential building which is often not the case.
It would be great if someone can help me with this. Thank you.
-Zaideus
Heat Load Profile for buildings
-
- Beiträge: 66
- Registriert: Mo Jun 18, 2018 4:01 pm
Hi Zaideus
Did you try to adjust the following parameters: heating set point temperature, activation of heating loop or the heating curve?
The other option would be, you are going to create your own profile or a monthly based profile in the building GUI.
Sunny greetings
Nathanael
Did you try to adjust the following parameters: heating set point temperature, activation of heating loop or the heating curve?
The other option would be, you are going to create your own profile or a monthly based profile in the building GUI.
Sunny greetings
Nathanael
-
- Information
-
Wer ist online?
Mitglieder in diesem Forum: 0 Mitglieder und 1 Gast