Good morning TurCoim
You have to get rid off one of two the pumps in the loop.
Sunny greetings
Nathanael
Die Suche ergab 66 Treffer
- Di Mai 07, 2019 8:36 am
- Forum: Polysun Educational
- Thema: Mass flow rate error (external heat exchanger) Thema ist als GELÖST markiert
- Antworten: 4
- Zugriffe: 87344
- Di Mai 07, 2019 8:14 am
- Forum: Polysun Simulation Software
- Thema: Minimum up and down time (with programmable controller)
- Antworten: 1
- Zugriffe: 21509
Re: Minimum up and down time (with programmable controller)
Hallo Zaideus
Check the auxiliary variable for "Prolonged time impulse" and set your conditions.
Your intentions with "PS" are correct.
It depends on your controller strategy but you might need "PI", too.
Sunny greeting
Nathanael
Check the auxiliary variable for "Prolonged time impulse" and set your conditions.
Your intentions with "PS" are correct.
It depends on your controller strategy but you might need "PI", too.
Sunny greeting
Nathanael
- Di Apr 30, 2019 2:32 pm
- Forum: Polysun Educational
- Thema: Hot source and problem of too many cold input
- Antworten: 1
- Zugriffe: 21556
Re: Hot source and problem of too many cold input
Hello TurCoim
Yes, there is a possibility to change the temperature. You can do it by modifying the cold water supply file.
No, it won't since you can only have one hot and cold water supply per loop.
Sunny greetings
Nathanael
Yes, there is a possibility to change the temperature. You can do it by modifying the cold water supply file.
No, it won't since you can only have one hot and cold water supply per loop.
Sunny greetings
Nathanael
- Di Apr 30, 2019 2:04 pm
- Forum: Polysun Educational
- Thema: Fluid change (not in a predefined scheme)
- Antworten: 4
- Zugriffe: 48344
Re: Fluid change (not in a predefined scheme)
Hello TurCoim Try it over the menu results and fluid overview. Other reason for the problem could be that your loop is to complex. The other 5 parameters (ex. boiling point) for fluid are only mandatory for the ice storage model. Therefore it is not necessary for your system. Sunny greetings Nathanael
- Di Apr 23, 2019 3:22 pm
- Forum: Polysun Educational
- Thema: Doubts in the sizing of storage and heat exchanger for swimming pool for shower, modoyfy parameter error and control Thema ist als GELÖST markiert
- Antworten: 1
- Zugriffe: 83157
Re: Doubts in the sizing of storage and heat exchanger for swimming pool for shower, modoyfy parameter error and control Thema ist als GELÖST markiert
Good evening TurCoim 1. I think this is part of your work but I am sure you can do it 💪 2. If you would like to modify catalog entries, you must change the user.id from =0 to user.id=xxxxxxx(random number with 8 digits). -> C:\Users\Public\Polysun open user.ini. and search for user.id 3. I think thi...
- Di Apr 16, 2019 10:44 am
- Forum: Polysun Educational
- Thema: External heat exchanger with ORC fluid Thema ist als GELÖST markiert
- Antworten: 1
- Zugriffe: 83629
Re: External heat exchanger with ORC fluid Thema ist als GELÖST markiert
Good morning TurCoim Please sync your Polysun license and are going to be able to copy and change existing catalog entries. Changing fluid: 1. Double click on one of the tubes in the circuit in which you would like to have your organic fluid 2. Component window pops up and click on the 4th icon on t...
- Di Mär 26, 2019 10:59 am
- Forum: Polysun Educational
- Thema: Das Projekt konnte nicht importiert werden. Thema ist als GELÖST markiert
- Antworten: 1
- Zugriffe: 50304
Re: Das Projekt konnte nicht importiert werden. Thema ist als GELÖST markiert
Hallo bac39824
Könntest du uns bitte an info@velasolaris.com die korrupte Datei und die Support Anfrage senden.
Sonnige Grüsse
Nathanael
Könntest du uns bitte an info@velasolaris.com die korrupte Datei und die Support Anfrage senden.
Sonnige Grüsse
Nathanael
- Do Jan 17, 2019 2:25 pm
- Forum: Polysun Educational
- Thema: Rücklauftemperaturanhebung Puffer
- Antworten: 1
- Zugriffe: 17200
Re: Rücklauftemperaturanhebung Puffer
Hallo reiferp In der Steuerung solltest du eigentlich den externen Wärmetauscher auswählen können. Siehe mein Screenshot: Capture.PNG Die Steuerung drehzahlgesteuerte Pumpe ist die einfachste Variante. In den Fernwärme System hat es einige Vorlagen, die du dir auch anschauen kannst. Welche Fehlermel...
- Do Jan 17, 2019 2:09 pm
- Forum: Polysun Educational
- Thema: Beimischung beim Trinkwasser
- Antworten: 1
- Zugriffe: 16967
Re: Beimischung beim Trinkwasser
Hallo reiferp
Das Dreiwegventil wird benötigt, damit die gewünschte WW-Temp. erreicht werden kann.
Du darfst sie gerne auch weglassen. Ist definitiv kein muss aber ich empfehle sie beizubehalten.
Sonnige Grüsse
Nathanael
Das Dreiwegventil wird benötigt, damit die gewünschte WW-Temp. erreicht werden kann.
Du darfst sie gerne auch weglassen. Ist definitiv kein muss aber ich empfehle sie beizubehalten.
Sonnige Grüsse
Nathanael
- Mi Dez 12, 2018 2:39 pm
- Forum: Polysun Educational
- Thema: Eisspeichersystem Solarthermie und Fernwärme Thema ist als GELÖST markiert
- Antworten: 2
- Zugriffe: 54132
Re: Eisspeichersystem Solarthermie und Fernwärme Thema ist als GELÖST markiert
Hallo Georg Qsol entspricht immer dem Kollektorfeldertrag. Deine Vermutung ist ziemlich sicher richtig. Du kannst es in der SImulationsalayse genauer prüfen, da du dort alle Temperaturen und Volumenströme verfolgen kannst. Könntest du mir einen Screenshot deiner Systemübersicht (EdistHeat) senden od...