Die Suche ergab 91 Treffer
- Di Jan 30, 2018 10:36 am
- Forum: Polysun Educational
- Thema: Definition von Mindestlaufzeiten (Kessel/Pumpen) mithilfe der Programmierbaren Steuerung
- Antworten: 2
- Zugriffe: 2529
Re: Definition von Mindestlaufzeiten (Kessel/Pumpen) mithilfe der Programmierbaren Steuerung
Hallo Elisabeth, da bist du in sehr kurzer Zeit auf einen zweiten Bug im Polysun bzw. der programmierbaren Steuerung gestoßen. Es ist leider so das die Funktion Mindestlaufzeit/Maximallaufzeit im Moment (in der programmierbaren Steuerung) nicht funktioniert. Ich würde empfehlen über eine geschickte ...
- Mo Jan 29, 2018 11:30 am
- Forum: Polysun Educational
- Thema: Soll-Vorlauftemperatur Heizkreis
- Antworten: 11
- Zugriffe: 9429
Re: Soll-Vorlauftemperatur Heizkreis
Hallo Elisabeth, ja das ist richtig. Für den fall das dein Speicher zu kalt ist funktoniert es nicht hinreichend genau. da die Heizkurve eine Funktion ist kannst du die Daten ja nach Excel übertragen und dort einfach rechnen, gemäß der Parameter: # Parameter HEATINGCURVE(Tsoll, Ta_norm, a, Ta): # # ...
- Fr Jan 26, 2018 8:14 am
- Forum: Polysun Educational
- Thema: Absorptions-Wämepumpe in Polysun möglich?
- Antworten: 3
- Zugriffe: 2616
Re: Absorptions-Wämepumpe in Polysun möglich?
Hallo Marcel, in Polysun ist bereits ein Modell für Absorptions Kältemaschinen hinterlegt, das wahrscheinlich auch deinen Anforderungen genügt. Du kannst im Modell für die Kältemaschine umstellen welche Technologie du verwenden willst (Ab- oder Adsorption) -> siehe Voragen Ordner Kühlung Wahrscheinl...
- Fr Jan 26, 2018 8:07 am
- Forum: Polysun Educational
- Thema: Soll-Vorlauftemperatur Heizkreis
- Antworten: 11
- Zugriffe: 9429
Re: Soll-Vorlauftemperatur Heizkreis
Hallo Elisabeth, danke für deine Frage - die Vorlauftemperatur des Heizkreises ist für die energetische Gesamtperformance des Systems natürlich besonders relevant! Grundsätzlich hängt es davon ab was für eine Eingabe bei der Gebäudelast gewählt wurde ob schon von Anfang an mit einer gleitenden Vorla...
- Mo Jan 22, 2018 10:28 am
- Forum: Polysun Simulation Software
- Thema: error during simulation
- Antworten: 9
- Zugriffe: 31678
Re: error during simulation
I would recommend to cross check if the cooling energy demand has a similar value as the delivers cooling energy than you can see if it is a reasonable error for you. Also we recommend for heating and cooling systems to use a heating loop and a cooling loop - the heating and cooling works only if yo...
- Mi Jan 17, 2018 8:41 am
- Forum: Polysun Simulation Software
- Thema: error during simulation
- Antworten: 9
- Zugriffe: 31678
Re: error during simulation
Dear Mounika, "i come up with the error cooling capacity of the building not met and source side temperature at the heat pump exceeded. i placed a mixing valve controller at the heat pump to decrease the source the side temperature but there is no change in the result" -> you should check ...
- Mi Jan 03, 2018 9:13 am
- Forum: Polysun Simulation Software
- Thema: error during simulation
- Antworten: 9
- Zugriffe: 31678
Re: error during simulation
Dear ragamounika22, please see under "standard templates" -> "hybrid collector systems" here you will find a system which is similar. Anyway the hydronic will not be exactly the same and you need to define for your location a suitable control strategy. I hope this helps you. Best...
- Mi Jan 03, 2018 9:12 am
- Forum: Polysun Simulation Software
- Thema: problem in designing
- Antworten: 1
- Zugriffe: 21148
Re: problem in designing
Dear ragamounika22, please see under "standard templates" -> "hybrid collector systems" here you will find a system which is similar. Anyway the hydronic will not be exactly the same and you need to define for your location a suitable control strategy. I hope this helps you. Best...
- Mi Jan 03, 2018 9:11 am
- Forum: Polysun Educational
- Thema: problem in designing
- Antworten: 1
- Zugriffe: 21252
Re: problem in designing
Dear ragamounika22, please see under "standard templates" -> "hybrid collector systems" here you will find a system which is similar. Anyway the hydronic will not be exactly the same and you need to define for your location a suitable control strategy. I hope this helps you. Best...
- Mi Jan 03, 2018 9:07 am
- Forum: Polysun Simulation Software
- Thema: Wirtschaftlichkeitsberechnung Eingabe HT NT Thema ist als GELÖST markiert
- Antworten: 2
- Zugriffe: 5854
Re: Wirtschaftlichkeitsberechnung Eingabe HT NT Thema ist als GELÖST markiert
Guten Tag Herr Hubmann, sie können ein induviduelleres Profil über stündliche Auflösung (.csv) einlesen. Dazu wählen sie (in der Wirtschaftlichkeitsauswertung) die Option "Elektrizitätsprofil" -> klicken auf "EKZ KEV..." -> jetzt öffnet sich ein neues Fenster in welchem sie den b...